Fedora

16 64bit下安装 LBP2900打印机

Hello.

I'm

goingo to post the new guide for the installation of Canon LBP2900

series on Fedora 17.

I think that this guide may be useful for all

Canon LBP series.

1)open root terminal and dont' connect the

printer

2) install all dependancies

#yum install

libc.so.6 libgcc_s.so.1 libpopt.so.0 libstdc++.so.6 libxml2.so.2

libz.so.1

3) link to and dowload the driver Canon CAPT 2.40

4)after you have

extract the files, from terminal go to

/Linux_CAPT_PrinterDriver_V240_uk_EN/64-bit-Driver/RPM

5)install

cndrvcups-common file

#rpm -ivh

cndrvcups-common-2.40-1.x86_64.rpm

6)install

cndrvcups-capt file

#rpm -ivh

cndrvcups-capt-2.40-1.x86_64.rpm

7)switch on the printer

and connect it on PC

wait the system to recognize the printer

8)

record the printer on the Print Spooler

#/usr/sbin/lpadmin -p

LBP2900 -m CNCUPSLBP2900CAPTK.ppd -v ccp:/var/ccpd/fifo0 -E

9)record

the printer on daemon setup file

# /usr/sbin/ccpdadmin -p

LBP2900 -o /dev/usb/lp0

如过启动系统后系统设置里边有打印机但是打印测试页面,打印机没有反映,就把上边的命令再执行一次.

10)restart ccpd daemon

#

/etc/init.d/ccpd restart

11) go to Applications/System

Settings/Printers from Fedora menu.

You will find the printer. You

can print a test page. Set it as default printer.

12)edit

rc.local to start the ccpd daemon at boot

# echo

/etc/init.d/ccpd start >> /etc/rc.local

13)set cups

service to start at boot

#chkconfig --level 35 cups on

14)set

ccpd service to start at boot

#cd /etc/init.d

#sudo gedit

ccpd

(replace "gedit" with "kwrite" or

other test editor if you use KDE or other DE)

and paste under

#!/bin/sh this

# chkconfig: 2345 95 20

# description: Some

description

# What your script does (not sure if this is

necessary though)

# processname: myscript

including in

the copy also #

and save

15)

#chkconfig --level 35

ccpd on

16)you can reboot and good printing

If

you have a LBP series different from 2900

you can replace

the point 8) and 9) with the following command

# ls

/usr/share/cups/model/ | grep CNCUPS

for see the list of

drivers for the LBP series printers.

this is the

result

CNCUPSLBP1120CAPTJ.ppd

CNCUPSLBP1120CAPTK.ppd

CNCUPSLBP1210CAPTJ.ppd

CNCUPSLBP1210CAPTK.ppd

CNCUPSLBP2900CAPTK.ppd

CNCUPSLBP3000CAPTJ.ppd

CNCUPSLBP3000CAPTK.ppd

CNCUPSLBP3200CAPTJ.ppd

CNCUPSLBP3200CAPTK.ppd

CNCUPSLBP3210CAPTJ.ppd

CNCUPSLBP3210CAPTK.ppd

CNCUPSLBP3300CAPTJ.ppd

CNCUPSLBP3300CAPTK.ppd

CNCUPSLBP3600CAPTJ.ppd

CNCUPSLBP5000CAPTJ.ppd

CNCUPSLBP5000CAPTK.ppd

there

are two driver

*K.ppd

*J.ppd

you have to

try first with file K.ppd

and to record printer on print

spooler

# /usr/sbin/lpadmin -p [printer model] -m [printer

driver file name] -v ccp:/var/ccpd/fifo0 -E

and to record

printer on daemon setup file

# /usr/sbin/ccpdadmin -p [printer

model] -o /dev/usb/lp0

That's all. Ciao ciao from Sicily

(Italy).

容易忽视的三点重要

1、打印机设置中 位置 localhost.localdomain

2、# echo

/etc/init.d/ccpd start >> /etc/rc.local

3、ccps 文件

#!/bin/sh

# chkconfig: 2345 95 20

# description: Some description

# What your script does (not sure if this is necessary though)

# processname: myscript

# startup script for Canon Printer Daemon for CUPS (ccpd)

if [ -f /etc/rc.d/init.d/functions ]; the